1. IVY METERING’s AEC-21Y-G1 smart ev charging module (1pc)
2. Air switch/circuit breaker/MCB (1pc)
3. EV charger box (1pc)
4. EV charger gun (1pc)
IVY METERING’s AEC-21Y-G1 smart ev charging module- it already combined smart metering, type b leakage current protection/residual current detection, and switching off by EVSE relay.
You can also readout easily by LED and LCD, what’s more you can use the NFC/RS485/GPRS/Bluetooth communication to realize better control.
In this case, you don’t need to find extra RCD/RCM module or relay, you don’t need to buy extra smart ev charging meter.
If you have your own ev chargers management system, how to integrate? Yes we aim to integrate into your local system, currently the communication procotol is IVY-BUS if you need modbus, OCPP etc protocol plz feel free to let us know.
If you have your own ev chargers box design, would we fit into? Sure, we are willing to put our ev charging module inside of colorful wall install ev charger, mode3 ev charger, level 2 ev charger, home ev charger etc. It’s compact enough so it will also make your charger as smaller as possible.
If you want to diy it and put on your logo? No problem, we offer OEM service and certification support if you need it.
More inquiry, welcome to visit www.ivy-emeter.com or contact us via ebp@ivy-metering.com
No Distributor or middleman, Factory-Direct!!!
