1. Brief Introduction
D114011-X929011 is a single phase two wire Din rail prepaid meter with G3 PLC communication and built-in relay, it can be used with keypad IHD (optional).
2. Technical Parameter
D114011 - X9029011
Impulse indication,width = 80ms±20ms
IEC62052-11, IEC62053-21, IEC62055-41
3. Function Description
3.1 Metering Function
l Maximum current is up to 80A
l Meter measures voltage, current, active power, reactive power, frequency, power factor, MD in the current month, MD of last 1 month, MD of last 2 month, the absolute value of total active energy, the absolute value of total active tariff energy, total input energy of the current month, total input energy of last 5 month, total output energy of the current month, total output energy of last 5 month, and total reactive energy.
3.2 Communication Function
l Support G3 PLC communication
l Support IR communication
3.4 Buzzer Function
l with buzzer inside, it will beep when low credit for 5 seconds, and you could press any key to turn it off. Also you could configure to enable or disable this buzzer function by IR communication.
l Divide into weekday timetable and weekend timetable, with 8 time period and 8 tariffs. Every timetable has a backup table for remote updating of backup timetable and configure the switching time. Meter will automatically switch the tariff table at the switching time.
l Support load ground connection, switch detection, influence of external magnetic field, abnormal voltage record.
l Degree of protection: IP51 (indoor meter)